The Blade Size will be etched into the blade holder, and will be a 3 digit number.
Yes, you can profile Flare skate blade. We do recommend that you skate on Flare before profiling just to give you a bench mark. After that you can adjust profile if necessary.
If you are profiling on a ProSharp® machine, please inquire at info@flareskateblade.com and we can send you some magnetic shims. The shims attach to the blade where it is clamped in the machine, and assist with keeping the blade clamped level and tight.
We do not carry Goalie blades at this time.
The exact same way you sharpen your traditional skate blades. No special equipment is required. However, a hollow adjustment is required to adjust for the flare.
To really be precise, use a Flare Square Edge Checker to ensure level sharpening edges. The Flare Square Edge Checker will work on Flare Blades as well as all traditional 3mm blades.
Click here for more detailed info on sharpening your Flare Skate Blades.
YES. Be sure to hold the honing stone parallel to the angled part of the blade only. Running it flush across the whole blade will dull your edges.
To hone DLC-Coated Blades, use a leather chamois cloth or a clay/gummy stone.
YES. Flare Blades can be sharpened on the Sparx® machine. To order your Sparx® grinding ring for Flare Blades, please visit their website. Make sure you follow our Hollow Conversion chart. For example, if you use a 5/8" hollow on standard skate blades, that is a 1 1/8" hollow on Flare Blades, so you would order the 1 1/8" grinding ring.
FACTORY PROFILE. As Flare Skate Blades are designed to fit in hockey's most popular holders, the profile is the same as the manufacturer's stock CCM®, or Graf® steel.
We do not carry True Blades.
Multifit Flare Skate Blade fit a number of skate blade holders from the most popular hockey skates on the market.
YES. But only where the blade meets the ice.
A traditional steel runner has a 3 mm base; Flare steel has a 4.5 mm base, giving you the power to perform exceptionally.
NO. We have weighed our steel against other skate blades and have found that there is no difference in weight.
NO. As with traditional blades, we recommend wiping your Flare Skate Blades clean after each use. Skate Soakers are good to use while the blades are in your bag, however when you get home you should always remove your skates from your bag, and remove the soakers from the blades to let the blades dry.
YES. Flare Skate Blades are approved by both the NHL and IIHF for use.
Most often, there is a small adjustment period, you will notice the Flare Blade benefits right away. For best results, we suggest giving yourself 3 hard skates. The harder you skate, the better your performance on Flare Blades.
Better than traditional steel, say our skaters. Many Flare Blade users state they don't have to sharpen their blades as often as they used to with traditional blades.
We offer a 30 Day Money Back Guarantee on all stainless steel blades, as well as a 1 Year Manufacturer Warranty on all blades.